How To Install Ssd In Laptop Without Reinstalling Windows

Why install SSD in laptop without reinstalling Windows?

When edifice your computer, it is hard to make a choice between a solid-land drive (SSD) and hard disk (HDD). Difficult deejay drives are much cheaper and more common, but they have internal moving parts, and then they are more than prone to damage. Moreover, HDDs tend to be slower in data reading and writing speed.Past contrast, SSD drives are more durable because they take no moving parts. On the other manus, they load everything much faster than HDD (more differences between HDD and SSD can be institute in the following tabular array).

Therefore, many users plan to replace HDD with SSD in laptop to make OS boot and run much faster. To install OS on SSD, you tin can remove the old hard drive, install the SSD bulldoze into your laptop, so reinstall everything. But it is fourth dimension-consuming. What'southward worse, the things will become more complicated when you don't have the Windows installation DVD or the Windows license and software activation keys are lost. And then, you might ask: how to install SSD in laptop without reinstalling Windows?

Steps to install SSD in laptop without reinstalling OS

To install SSD for replacing the onetime difficult drive without reinstalling OS and other applications, you need to first transfer all data from HDD to the target solid-land bulldoze, then remove the old HDD and install SSD into laptop to brand it kicking from the destination disk. The whole process can exist divided into the following iii steps:

Step 1. Transfer laptop Windows to SSD bulldoze

To movement Windows from HDD to SSD bulldoze is not as simple every bit dragging and dropping, which will make boot files become invalid and not work afterward. This special chore requires a professional deejay cloning software like AOMEI Partition Banana Professional. Information technology tin can transfer everything including Windows OS on your existing deejay to another 1 by cloning a hard drive. Moreover, the destination hd is bootable subsequently the clone. Below is how to clone HDD to SSD in detail.

Grooming work:
√ Connect the destination SSD drive to your laptop and make sure information technology is detected successfully. If your laptop has simply one drive slot, you will need a SATA to USB adapter.
√ Move large applications that y'all do not want to keep on SSD: if your destination SSD bulldoze is smaller than the current HDD, you can move larger folders to an external drive to reduce used space for cloning to the smaller SSD.
√ Make a total backup of your organisation: to avoid some unexpected accidents such as sudden power failure occurs during the cloning procedure, information technology is wise to make a system backup.
√ Dorsum upwards everything required on the SSD drive considering the cloning procedure will erase all the information on the destination disk.
√ The AOMEI Segmentation Banana Professional comes with a Demo Version, so you tin can download it and take a try first.

1.ane. Install and launch AOMEI Partition Banana Professional to enter its main interface. Right-click the system disk and select "Clone Disk".

1.two. Cull a deejay copying methods every bit yous need and click "Side by side".

①"Clone Deejay Quickly": only copies the used space to the destination disk. So yous are immune to clone large disk to smaller disk as long as the destination disk is larger than the used space of the source disk.
②"Sector-by-Sector Clone": will copy every sector to the destination disk, so the destination disk must be larger than the source disk.

ane.three. Select the destination deejay and tick "Optimize the operation of SSD". Then click "Side by side".

1.iv. If y'all cull "Clone Disk Speedily" method above, yous can change partition size in this window. Later that, click "Next" to continue.

1.5. Read the subsequent boot annotation carefully and click "Finish".

one.half dozen. Back to the main interface, click "Apply" and and so "Proceed" to execute the pending operation.

★★★★★If you just desire to transfer OS segmentation to SSD, you can effort its "Migrate Os to SSD" magician.

Pace 2. Install SSD drive to laptop

In one case cloning is accomplished, all data on the original disk has been migrated to the SSD drive. Now, please take below steps to install the SSD drive into your laptop to replace the old hard drive.

2.1. Plow off your laptop; disconnect SSD bulldoze, power cable and other connected cables. Identify your laptop upside-down.

2.2. You should see a plastic cut-out panel in the lesser which is covered by several screws. At present remove them using a screwdriver. If your laptop has no cutting-out, you need to take the entire bottom off to get access to your old difficult drive.

ii.3. Unscrew all screws that are used to secure your HDD to your laptop.

ii.iv. Lift the quondam drive upward about 30 or 45 degrees and pull information technology out.

2.v. Now, you tin install the SSD by doing the reverse of uninstalling the HDD. Please slide the solid-country drive in at an bending and push button it correctly into place.

ii.6. Then secure it with the screws you removed before. At final, spiral the dorsum panel roofing the bulldoze back on.

Pace three. Kick laptop from SSD drive

Now, you lot can enter BIOS environs to change kicking club to make laptop boot from SSD drive.

3.1. Reboot the laptop and long press ESC, F1,F2, F8 or F10 during the initial startup screen. And then Boot menu volition appear.

iii.two. Utilise the arrow keys to access to the Kicking tab. System devices volition appear in order of priority.

iii.3. To give the cloned SSD drive boot sequence priority over the hard drive, just move it to the first position in the list.

3.4. Salvage and exit the BIOS setup utility. And your laptop will restart with the changed settings.

If the cloned SSD won't boot, you lot can check whether the kicking fashion (BIOS or UEFI) is proper, and the system files are complete.

Verdict

This is how to install SSD in laptop without reinstalling Windows ten/viii/7 step past step. Replacing laptop HDD with SSD drive is one of the most effective and cost-efficient ways to speed up computer.

AOMEI Segmentation Assistant Professional besides provides cracking solutions to manage your disk partitioning. For example, y'all can speedily partition a hard bulldoze within two steps, classify free space from one partition to some other, convert organization deejay from MBR to GPT, GPT to MBR without losing information and so on. To install SSD to replace HDD in Windows Server 2019/2016/2012/2008/2003, you tin can try AOMEI Partitioning Assistant Server.

Source: https://www.diskpart.com/articles/how-to-install-ssd-in-laptop-without-reinstalling-windows-7201.html

Posted by: delongagantiched57.blogspot.com

Share this post